Tradução e análise de palavras por inteligência artificial ChatGPT
Nesta página você pode obter uma análise detalhada de uma palavra ou frase, produzida usando a melhor tecnologia de inteligência artificial até o momento:
- como a palavra é usada
- frequência de uso
- é usado com mais frequência na fala oral ou escrita
- opções de tradução de palavras
- exemplos de uso (várias frases com tradução)
- etimologia
system with component replacement - tradução para russo
[wið]
общая лексика
ссориться
синоним
предлог
общая лексика
указывает на
совместность (часто together with) (вместе) с
взаимоотношение с
пребывание в доме у кого-л. у
работу где-л. или у кого-л. в
смешивание, сочетание, добавление (вместе) с
к
средство на
за
наличие чего-л. и кого-л. у
при
с (собой)
"meat" begins with"m" - (слово) meat начинается с m
дополнительные обстоятельства или моменты причём
условия совершения действия в условиях
когда
при том
что
(по отношению) к
для
совместимость или сопоставимость наравне с
причину, источник чего-л. от
из-за
указывает на движение в том же направлении по
что касается
имеет уступительное значение (обычно with all) несмотря на
Wikipédia
Within the CMY color space used in color printing, a range of colors can be achieved by combining the three primary colors. This combination can be thought of as a hue component (which will require a maximum of two primary colors) and a grey component (a mixture of all three, in an appropriate quantity to give the required saturation). If the grey component is replaced by black ink, the same color is being achieved by using two primaries and black. The substitution of black for the grey component is described as grey component replacement (GCR).
In GCR, contrary to under color removal (UCR), the CMY values that add to grey all along the tone scale can be replaced with black ink. UCR only adds black to the CMY equivalent of what would have printed as a grey or near-grey.
- Advantage: GCR uses less ink, and some of that ink is black, normally cheaper than the others.
- Advantage: The areas where less ink is used are regions of high ink use, so the potential problems of drying and ink set-off are reduced.
- Advantage: The resulting output is less susceptible to changes in the printing variables since not as much C, M, and Y require balancing.
- Disadvantages: There may be potential quality issues associated with GCR. Sometimes it reduces the ability to adjust colors. It may create problems with balancing black halftone. A high amount of GCR causes the shadow areas to print too weakly, giving a low-contrast image.
